Nastec Srl
Via della Tecnica 8
36048 Barbarano Mossano
Vicenza – Italia
t. +39 0444 886289
f. +39 0444 776099
p.iva & c.f. 03392100248
c.s. 250.000€ i.v.
info@nastec.eu
pec@pec.nastec.eu
MIDA Solar
Ideal for any kind of
MIDA Solar, in MP (MultiPower) version,
guarantees the operation of the pump
at any time of the day
MPPT: always
the maximum
power available
Unmatched user
experience
Thanks to Nastec NOW
it’s possible to communicate
with all Nastec devices
Bluetooth® SMART
Ideal for any kind of solar pumping application
Allows:
- New solar pumping systems creation.
- Conversion of existing systems into solar pumping systems.
- Control of both three-phase and single-phase pumps.
- Soft start and soft stop.
- Installation on humid and dusty environments made possible by IP66 (NEMA 4X) protection degree.
- Easy and fast commissioning thanks to initial configuration wizard.
- High thermal and mechanical performance thanks to aluminium case and independent ventilation.
MIDA Solar can be used with any type of traditional AC pump, thereby offering maximum flexibility in several areas of application.
When using surface pumps, MIDA Solar can be used for an irrigation system drawing water from a nearby water supply, or powering a pool pump at no cost.
When using submersible pumps, MIDA Solar can fill tanks for watering livestock or simply irrigate lawns or crops.
MIDA Solar, in MP (MultiPower) version, can be powered in DC by solar panels or in AC by network or generator.
To ensure the functioning of the pump at any hour of the day. This controls the peaks of water demand using AC input to avoid the oversizing of the photovoltaic system.
HMA accessory, MIDA Solar, in MP (MultiPower) version, can be powered in DC by solar panels or in AC by network or generator used in combination with MIDA Solar MP models, manages independently the exchange from a source of energy to another on the basis of several options that can be select by the user:
- irradiance level.
- hour of the day.
- achievement of the requested daily range.
- remote control trough digital command.
Automatic voltage adjustment
MIDA Solar is equipped with an internal “boost” circuit able to increase the voltage coming from solar panels. In this way the sizing of the photovoltaic system is independent of the pump’s nominal voltage and only proportional to its power. This implies a significant saving in the number of the solar panels, compared to systems without boost.
Example:
Pump power: 0,75 kW
Motor’s nominal voltage: 3×230 VAC
Recommended photovoltaic system power: 1250 W
Without boost
In order to allow the pump to reach the maximum frequency (maximum speed) it is necessary to guarantee at least 320 VDC input thus it is necessary to install 11 panels 250 Wp, totally 2750 Wp.
With boost
Thanks to the voltage boost integrated in MIDA Solar, only 5 panels 25O Wp are needed, with a consequent saving of 6 panels.
* The example considers panels 250 Wp, 30 Vmp, 37 Voc.
Built-in protections against:
- Overvoltage and undervoltage.
- Overcurrent and no load.
- Dry running.
- Overtemperature.
Advanced motor controls:
- Control of single phase motors.
- Next generation control of asynchronous motors.
- Sensorless control of permanent magnet synchronous motors.
EMC compatibility for residential environment:
- Integrated PFC (P.F. 1) to meet EN61000-3-2
- Integrated input filter for Category C1 (EN61800-3), Class B (EN55011)
Built-in protections against:
- Overvoltage and undervoltage.
- Overcurrent and no load.
- Dry running.
- Overtemperature.
Advanced motor controls:
- Control of single phase motors.
- Next generation control of asynchronous motors.
- Sensorless control of permanent magnet synchronous motors.
EMC compatibility for residential environment:
- Integrated PFC (P.F. 1) to meet EN61000-3-2
- Integrated input filter for Category C1 (EN61800-3), Class B (EN55011)
MPPT: always the maximum power available
Based on the varying conditions of solar irradiation and temperature, MPPT (Maximum Power Point Tracking) maximises the electrical power drawn from the panels and therefore the amount of water pumped. The greater the solar irradiation the faster the pump’s rotation speed, and consequently water flow increases.
When solar irradiation decreases (due to clouds or the different times of day), the pump reduces frequency and therefore the flow, but it continues to provide water until the irradiation falls below a minimum level necessary to ensure operation.
Unmatched user experience.
Thanks to Nastec NOW App it’s possible to communicate with all Nastec devices Bluetooth® SMART in order to:
- Monitor multiple operating parameters simultaneously on the wide, high definition, coloured screen of your smartphone or tablet.
- Get statistics of energy consumption and check alarms history.
- Make programs, save them in the archive, copy them to other devices and share them among multiple users.
- Perform reports with the possibility to insert notes, images and email them or keep them into the digital archive.
- Remotely control, via wi-fi or GSM, a Nastec device, using a smartphone nearby as a modem, through the free Nastec REMO service and connecting to remo.nastec.eu
- Promote your work on the nastec.eu website by sending photos from your smartphone, thanks to the MY WORKS section
